THOMSON VS 470 User Manual page 8

01_VS470_en 24/08/04 10:34 Page 8
Improvement of picture and sound
You will obtain optimal service operation of your Video Sender by correctly orienting the
antenna (A). However, reflected signals or other signal degrading factors can affect good quality
signal transmission. In this case, readjust antenna positions or slightly move the transmitter or
receiver until you get crystal clear reception.
Transmitter / Receiver
(A)
off.on
If no picture is obtained,
check that the transmitter and the receiver have not been installed in the reverse order (each
unit corresponds either to the input or to the output of the Audio-Video signal). Check that they
have been properly connected and that they are switched on (on position). Ensure that the
channel selector is set to the same letter on both units.
If transmission is blurred or scrambled,
choose another channel but make sure that it is identical on both units.
Transmitter
Receiver
8