Ppp Ifconfig - THOMSON SPEEDTOUCH 510I - REFERENCE GUIDE RELEASE 4.0 Reference Manual

ppp ifconfig

Configure a Routed PPP(oA/oE) interface.
The interface to be configured may not be connected at the time of configuration. Execute ppp ifdetach
Note
prior to executing the ppp ifconfig command.
SYNTAX:
ppp ifconfig
intf
E-SIT-CTC-20021203-0003 v1.0
intf = <intfname>
[dest = <phonebook entry>]
[user = <string>]
[password = <string>]
[qos = <string>]
[proto = <{pppoa|pppoe}>]
[acname = <string>]
[servicename = <string>]
[encaps = <{vcmux|llc}>]
[pcomp = <{off|on}>]
[accomp = <{on|off|negotiate}>]
[trace = <{off|on}>]
[pap = <{off|on}>]
[restart = <{off|on}>]
[retryinterval = <number{0-65535}>]
[passive = <{off|on}>]
[silent = <{off|on}>]
[echo = <{off|on}>]
[mru = <number{293-8192}>]
[laddr = <ip-address>]
[raddr = <ip-address>]
[netmask = <ip-mask(dotted or cidr)>]
[format = <{dotted|cidr}>]
[pool = <{poolname|none}>]
[savepwd = <{off|on}>]
[demanddial = <{off|on}>]
[primdns = <ip-address>]
[secdns = <ip-address>]
[idle = <number{0-1000000}>]
[addrtrans = <{none|pat}>]
[unnumbered = <{off|on}>]
[poolstart = <ip-address>]
[poolend = <ip-address>]
[status = <{down|up}>]
The name of the Routed PPP(oA/oE) interface to configure.
PPP Commands
REQUIRED
225