5.3 Radio reception
Ensure that the LOCK-switch is off.
•
Press POWER to switch the radio on.
•
The frequency and the wave band will appear on the display.
•
Adjust the volume with the VOLUME control.
•
You can connect headphones to the
•
The loudspeaker will then be switched off.
•
Set the wave range with the FM MW SW1 SW2 switch
•
If you select SW with the FM MW SW1 SW2 switch, press
•
METER to select the enquired meter band of short wave.
The chosen short-wave band and the frequency will appear on
•
the display.
Tune to a radio station either manually, automatically, directly
•
or with the PRESET buttons.
MONO/STEREO
When appears on the display, you are receiving an FM stereo
•
transmitter. If you are listening with headphones, you will
hear the FM station in stereo.
A disturbing noise, due to a weak FM stereo signal, can be
•
suppressed by setting MONO/STEREO to MONO.
The indication goes out and you will hear the FM station in
•
mono.
Press POWER once again to switch the radio off.
•
The display will now indicate the current time.
•
socket
12