Table of Contents
Advertisement
Reference Information
This section provides reference or supplemental information. Topics in this section include:
•
Mounting
•
Downloading Updated Firmware
•
Licensed Third-Party Software Used in the Switchers
Mounting
Tabletop Mounting
Attach the provided rubber feet to the bottom four corners of the enclosure.
Rack Mounting
The DTP2 CrossPoint 82 can be rack-mounted using the preinstalled rack ears brackets.
UL guidelines for rack mounting
The following Underwriters Laboratories (UL) guidelines pertain to the safe installation of the DTP2 CrossPoint 82
in a rack.
CAUTION:
•
Elevated operating ambient temperature — If the equipment is installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may be greater than room
ambient temperature. Therefore, install the equipment in an environment compatible with the maximum
ambient temperature (TMA = +122 °F, +50 °C) specified by Extron.
•
Reduced air flow — Install the equipment in a rack so that the amount of air flow required for safe
operation of the equipment is not compromised.
•
Mechanical loading — When mounting the equipment in the rack, ensure that uneven mechanical
loading does not cause a hazardous condition.
•
Circuit overloading — When connecting the equipment to the supply circuit, consider the effect that
circuit overloading might have on overcurrent protection and supply wiring. Consider equipment
nameplate ratings when addressing this concern.
•
Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay
particular attention to supply connections other than direct connections to the branch circuit (for
example, use of power strips).
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Reference Information
99
Advertisement
Table of Contents
