Table of Contents
Advertisement
Introduction
This section provides general information about this guide and the Extron DTP2 CrossPoint 82 switchers. Topics
in this section include:
•
About this Guide
•
Product Description
•
Features
•
Setup and Configuration Methods
•
Application Diagrams
About this Guide
This guide describes how to install, operate, and configure the DTP2 CrossPoint 82 Seamless Scaling
Presentation Matrix Switchers.
In this guide, the
The terms "switcher" and "matrix switcher" are used interchangeably to refer to any of the DTP2 CrossPoint 82
models.
The following terms refer to groups of DTP2 CrossPoint 82 models:
•
"Base model" refers to the basic DTP2 CrossPoint 82 containing no amplifier module.
•
"Amplifier models" and "IPCP models" refer to DTP2 CrossPoint 82 IPCP SA and the DTP2 CrossPoint 82
IPCP MA 70 models.
Product Description
The Extron DTP2 CrossPoint 82 switchers are eight-input seamless scaling presentation matrix switchers that
support video input signal resolutions up to 4K @ 60 Hz at 4:4:4, and output signals up to 4K @ 30 Hz. All models
incorporate Extron Vector 4K seamless scaling technology engineered for the most demanding applications. They
feature DisplayPort, HDMI, and DTP2 inputs, an HDMI output, and a scaled DTP2 output extension to send video,
audio, and control signals up to 330 feet (100 meters) over a shielded CATx cable.
The DTP2 CrossPoint 82 switchers deliver excellent image quality, fast and reliable automatic switching, Extron
ProDSP audio processing (including audio embedding and de-embedding, and Mic/Line mixing with ducking,
feedback suppression, and Phantom power), Extron ProDSP audio configuration, seamless video transition
effects, logo keying, and HDMI loop-out. The switchers can be controlled and configured via Ethernet, RS-232, or
USB.
The DTP2 CrossPoint 82 IPCP SA and IPCP MA 70 models each have a built-in Extron IPCP Pro 355M Control
Processor, and an integrated class D power amplifier.
•
DTP2 CrossPoint 82 IPCP SA supports stereo audio output from a 2 x 25 watts amplifier.
•
DTP2 CrossPoint 82 IPCP MA 70 supports mono audio output from a 100 watts amplifier.
model names
listed in the table on the next page refer to specific DTP2 CrossPoint 82 models.
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Introduction
1
Advertisement
Table of Contents
