15
REMOVING COMPONENTS
The machine does not have any safety
device;
electrical
components that reach high temperatures
are contained in the machine. Use
extreme caution when operating in these
conditions.
15.1
Removing the External Cover
The following tools are necessary to remove this component:
Torx screwdriver T10 and T20
Phillips screwdriver PH2
Long nose pliers
Remove the upper cover. (* only versions M2, M2+, B2 and B2+).
components
and
Remove the lid from the water tank.
Remove the tank; lift it using the inside handles.
Remove the coffee bean hopper lid.
English
75