13
USB FUNCTIONS
13.1
Export via a USB
It is possible to save on a USB memory stick a configuration file containing the
current settings of the machine.
Remove the USB port cover.
Insert the USB key into the USB socket.
Access the programming menu by pressing the "settings" icon.
Enter the password of the technical profile. Select the "Machine settings" item,
subsequently the "Machine Configuration" item and finally the "Export via a USB"
item.
If a USB memory stick is not present, the
"Please insert USB memory stick" message
is displayed.
Press the "Export" key. At this point the machine settings are exported into a
configuration file on a USB memory stick. Press the "Remove USB" key. remove
the USB key.
13.2
Import from a USB
It is possible to import new machine settings from a configuration file that has been
saved onto a USB memory stick.
Remove the USB port cover.
Insert the USB key into the USB socket.
Access the programming menu by pressing the "settings" icon.
Enter the password of the technical profile. Select the "Machine settings" item,
subsequently the "Machine Configuration" item and finally the "Import from a USB"
item.
If a USB memory stick is not present, the
"Please insert USB memory stick" message
is displayed.
Select the file and press the "Import the files selected" key. At this point the
machine settings are imported from the file selected (present in the USB memory
stick) to the machine. Wait for the configuration to load. At the end of the
procedure the machine restarts. remove the USB key.
English
69