Description Of The Controls; Switching On; Stop; Adjusting The Power Level - Smeg SI3633B Manual To Installation And Use

2 2 / / USING YOUR APPLIANCE
EN
DESCRIPTION OF THE
• •
CONTROLS
A
Start/stop buttons.
B
Timer / power setting.
C
Timer button.
• •

SWITCHING ON

Press the start/stop button for the cooking
zone you want to use. A flashing 0 0 display and
a beep indicates that the cooking zone is on.
A fixed dot appears in the selected display.
You can now choose the desired power level.
If you do not select a power level, the cooking
zone will automatically switch off.

STOP

• •
Hold down the start/stop button for the cook-
ing zone used.

ADJUSTING THE POWER LEVEL

• •
+
Press the " " button to increase your power
level from 1 to P (maximum power) and the "
button to reduce it.
When the appliance is switched on, you can
move directly to maximum power "P" by
-
pressing the " " button.
B
A

SETTING THE TIMER

• •
There is a rotating timer for each cooking
zone. The 4 timers can be used together.
C
By pressing the
can select the cooking zone to which you
wish to apply the timer.
The timer leds can only be set for zones that
are in operation. The led of the timer being
displayed will be highlighted.
To use the timer:
- Switch on the cooking zone and adjust the
power level.
- Select the timer led of the cooking zone.
+
- Press or
ting for your cooking time. For long durations,
-
press to reach 99 minutes directly.
The timer starts counting only if the cooking
zone is covered with an item of cookware.
When the cooking is finished the zone switch-
es off, the timer indicates 0 0 , and you are noti-
fied by a s s o o u u n n d d s s i i g g n n a a l l .
- Press any button to stop the beeping.
-
"
To change the timer settings:
- Select your timer
+
- Press on
To stop the timer:
- Select your timer
- Press twice on
22
button repeatedly you
-
until you reach the desired set-
-
or .
+ -
and .