Removing The Oven Door; Technical Support - Smeg SE990XKG Operating, Maintenance And Installation Instructions

Table of Contents

REMOVING THE OVEN DOOR

To facilitate cleaning of the oven, the door can be removed as follows:

Hinges with moving bolts (fig. 25)

The hinges

A are provided with two moving bolts

B which lock the door in the open position when connected to elements

C. The door must then be raised and pulled out; to do this, grip the sides of the door near the

hinges. To refit the door, first slide the hinges into their grooves

D and then close the door. DO NOT forget to lower the two moving bolts B used to prop the

door open.

The glass door panel can be easily removed by unscrewing the 4 side screws (fig. 24).

N.B.: the screws must not be fully tightened as this can damage the gasket.

Accessories provided with the oven

The appliance can be provided with runners which must

be hooked to the oven wall. Slide the racks and tray

provided into the runners.

To remove the runners, simply press down (fig. 26).

If the appliance is not working properly, you are advised

to check the following before calling the Technical

Support service:

check that the appliance is correctly plugged in;

check that the gas flow is regular and that the pipe is

not kinked or interrupted.

fig. 24

fig. 25

fig. 26

��

Table of Contents

Show Quick Links

Table of Contents

Se900gx