Table of Contents
Advertisement
Operation
Suitable for induction cooking
20
Switch on the cooking zone
1. Press the ON/OFF key
short signal will sound.
2. Then immediately press the plus key
(1...15). The minus key
power setting display shows the power setting which has been selected.
A power level will be activated direct when one of the power setting pre-
select keys
/
/
Key
- Power level 7
Key
- Power level 11
Key
- Power level 15
The power setting display blinks (pan recognition).
3. Immediately put cookware suitable for induction cooking onto the cooking
zone. The pot or pan will be heated up.
Note!
• Should the cooking zone be switched on and no power setting be selected,
the cooking zone will switch off automatically.
Switching off a cooking zone
4. Press the ON/OFF key
irrespective of the power level, the display will go off or an "H" will appear
as a residual heat display.
Automatic switch-off (timer)
The timer can be used to automatically switch off the cooking zone after a
certain period of time. Times ranging from 1 minute to 99 minutes can be set.
1. Select a power setting for the cooking zone and place a pan on the zone.
2. Press the plus key
time. The minus key
setting. The display will indicate the cooking time selected. The setting
can be adjusted with the control dial
3. Once the time has lapsed the cooking zone will switch off and a time-
limited signal will sound.
In order to acknowledge the buzzer press any key of the respective
cooking zone.
until "0" blinks in the power setting display. A
to select the power setting
can be used to reduce the setting. The
is pressed.
. The cooking zone will be switched off direct
of the timer
in order to select the cooking
of the timer
can be used to reduce the
GB
Advertisement
Table of Contents
