Table of Contents
Advertisement
11.4 Hob seal
• Before installing, check that the hob seal is
attached properly.
• Ensure that no liquid gets between the frame of
the hob and the work surface, or between the hob
and the wall, as it could then fall onto appliances
below.
• If the hob is installed into a work surface which is
not flat, e.g. ones with ceramic or similar
coverings (tiles, etc.), any seal on the hob must be
removed and the cooking surface must be sealed
using plastic sealant.
• Do not fix the hob using silicon as this would make it impossible to uninstall the hob, if necessary,
without damaging it.
11.5 Section cut from the work surface
• Cut the work surface precisely, using a good, straight saw blade or a vertical milling cutter. The
surfaces of the cut area must then be sealed to prevent the ingress of moisture.
• The glass ceramic cooking surface must be perfectly horizontal and perfectly sealed. Installing it
under tension could lead to the plate breaking.
• Check that the hob seal is attached properly.
• The hob should be fixed in place using clips or tongues.
Hobs without a frame
Hobs with a frame
Instructions for the installer
X= 770 mm Y= 730 mm
X= 600 mm Y= 560 mm
X= 758 mm Y= 750 mm
51
Advertisement
Table of Contents
