Testing; Instructions For The Installer - Smeg SI2741D Manual

1. Remove the screws from the holes indicated
in the figure below.
2. Fasten the fixing brackets (A) into the holes
marked using the screws that were removed
in order to correctly fix the hob to the
structure.
If tightened too much the glass may be
strained and crack.
The fixing brackets should be installed differently
according to the thickness of the countertop.
• Countertop thickness 30 mm:
• Countertop thickness 40 mm:
91477A906/C
• Countertop thickness 50 mm:
In the case of countertops of less than
30 mm, an additional spacer should be
used between the bracket and the top.

Testing

At the end of installation, carry out a brief
inspection test. If it fails to work, after making
sure that you have carried out the instructions
correctly, contact Technical Support.

Instructions for the installer

• If you use a plug (if present) to connect to
the power supply, the plug must be
accessible after installation.
• Do not bend or trap the power cable.
• The appliance must be installed according
to the installation diagrams.
• If the appliance does not work correctly
after having carried out all the checks,
contact your local Authorised Service
Centre.
• Once the appliance has been installed,
please explain to the user how to use it
correctly.
INSTALLATION - 35