Before First Use; Intended Use Of The Appliance - Smeg SE2842IDX Manual

Table of Contents

4. BEFORE FIRST USE

Do not leave waste packaging unattended in the home environment. Separate the various waste

materials and take them to the nearest differentiated waste collection centre.

Remove all the REMOVABLE labels and any protective film from the appliance.

To switch on the hob, follow the instructions provided under "Use of the hob".

Before cooking for the first time the hob has to be cleaned.

Following this, put a saucepan of water on the front hotplates and turn them on full for at least 30

minutes. After the 30 minutes have passed, turn off the front hotplates and turn the rear hotplates on full.

This treatment is necessary in order to get rid of the "new smell" and to evaporate any humidity that has

accumulated during the manufacturing process. This is necessary to ensure that the electronic circuits

and the control buttons work properly.

If the controls do not work properly after 30 minutes, it means that not all the humidity has

evaporated: leave the hotplates on until all the humidity has evaporated and then turn off the

hob.

The appliance was designed specifically for domestic use, and is therefore suitable for cooking and

heating food. The appliance was not designed and manufactured for professional use. Smeg cannot be

held liable for damage arising from incorrect use of the appliance.

Warning:

The manufacturer cannot be held liable for any personal injury or property damage caused by

failure to observe the above requirements, by tampering with any part of the appliance or by

using non-original spare parts.

Instructions for the User

Table of Contents