Using The Sensors - Smeg SE2842IDX Manual

7. USING THE SENSORS

The glass ceramic hob is controlled by means of the Touch Control sensor buttons. Operating the sensor
buttons: lightly touch a symbol on the glass ceramic surface. The buzzer will sound to confirm every
effective touch. For simplicity, from now on we will refer to the Touch Control sensor buttons simply as
the «button».
On/off button
Use this to turn the hob on and off. In effect, this button is the main switch.
Cooking zone selector button
By activating one of the available selectors you select a cooking zone, the power level of which
can then be adjusted using the "
Power level indicator
This indicator shows the level selected, i.e.:
= the residual heat
= the Power function
= saucepan recognition
= rapid start cooking
= the Stop function
= Child lock
= Plate warmer function (where applicable)
STOP button
The cooking process can be briefly paused using the STOP function.
Timer selector
For programming the automatic switch-off or timer.
40
Instructions for the User
Minus button / Plus button
These two buttons enable the power level, automatic switch-off and timer to be adjusted
and set. Decrease values using the "
button (plus). The " " and "
down (again individually) for a period (to modify the value quickly). The indicated value
can be cancelled by pressing both buttons simultaneously.
" button or the " " button.
" button (minus), increase them using the "
" buttons can be activated with a single touch or held
"