Table of Contents
Advertisement
2. Then turn them upwards to fix them in place.
Fixing to the built-in cabinet
In order to ensure fixing to the built-in cabinet
and optimum centring, the supplied fixing
brackets must be screwed into the holes in the
bottom casing.
Screw the fixing brackets into the dedicated
holes to properly fasten the hob to the built-in
structure.
Fixed connection
Fit the power line with an all-pole circuit breaker
with a contact separation distance sufficient to
provide complete disconnection in category III
overvoltage conditions, pursuant to installation
regulations.
For the Australian/New Zealand market:
The circuit breaker incorporated in the fixed
connection must comply with AS/NZS 3000.
Testing
At the end of installation, carry out a brief
inspection test. If it fails to work, after making
sure that you have carried out the instructions
correctly, contact Technical Support.
91477A937/A
Instructions for the installer
• If you use a plug (if present) to connect to
the power supply, the plug must be
accessible after installation.
• Do not bend or trap the power cable.
• The appliance must be installed according
to the installation diagrams.
• If the appliance does not work correctly
after having carried out all the checks,
contact your local Authorised Service
Centre.
• Once the appliance has been installed,
please explain to the user how to use it
correctly.
INSTALLATION - 33
Advertisement
Table of Contents
