Positioning The Skirt (On Some Models Only); Positioning And Levelling The Appliance - Smeg SCB 60 Manual

Instructions for the installer

11.5 Positioning the skirt (on some models only)

The skirt must always be positioned and secured correctly on
C
the appliance.
1 Unscrew the 2 nuts (B) on the back of the worktop.
2 Position the skirt above the worktop, taking care to align
the pins (C) with the holes (D).
3 Secure the skirt to the worktop by tightening screws (A).

11.6 Positioning and levelling the appliance

After making the electrical and/or gas connections, level the
appliance on the floor by means of its four adjustable feet.
Insert the front feet first and then the rear ones.
The appliance must be properly levelled to ensure better
stability. Screw or unscrew the bottom part of the foot until the
appliance is stable and level on the floor.
To prevent possible damage to the appliance, we recommend to screw the front feet first and then the
rear ones.
32