Mounting The Rear Top Skirtboard; Positioning And Levelling The Appliance (On Some Models Only) - Smeg GCE9003 Manual

5.2 Mounting the rear top skirtboard

• Loosen nuts B.
• Position the skirt above the top, taking care to align pins
C with holes D.
• Secure the skirt to the top by tightening screws A.

5.3 Positioning and levelling the appliance (on some models only)

After making the electrical connection, level the appliance on the ground by means of its four adjustable
feet. For good cooking results, the appliance must be properly levelled. Depending on the model you
have purchased, the foot height adjustment range may vary from 70 to 95 mm and from 110 to 160 mm.
These heights refer to the distance between the highest point of the foot (fixed part) and the lowest point
(movable part which rests on the floor).
26
Instructions for the installer