Description Of The Controls On The Front Panel - Smeg SCB 60 CSV8 Manual

Instructions for the user

4.1 Description of the controls on the front panel

1 2 3 4
4.1.1 Temperature selection knob
The cooking temperature is selected by turning the knob clockwise to the required
setting, between 50° and 260°C.
The indicator light comes on to indicate that the oven is heating up. When this light
goes out, the preset heating temperature has been reached. When the light flashes
regularly, it means that the temperature inside the oven is kept steady on the set
level.
4.1.2 Function selection knob
The oven's various functions are suitable for different cooking modes. After
selecting the required function, set the cooking temperature using the thermostat
knob. For more information on cooking functions, see:
"8. COOKING WITH THE OVEN".
4.1.3 Timer knob
This knob allows to set the timer. The numbers indicated are minutes. Adjustment is
progressive so that the time can also be set to any intermediate value between
these numbers. At the end of the set time, a buzzer will sound but cooking will not
be interrupted.
The timer does not stop the cooking operation. It only warns the user that the preset number of minutes
has passed.
4.1.4 Hob burners control knob
Standard heating
The circle next to each knob indicates the cooking zone it controls. To switch a zone
on, press the knob and turn it to the required position. Adjustment is continuous, so
the appliance functions when set to the intermediate values as well. To switch off a
zone, return the knob to 0.
Double heating
The circle next to each knob indicates the cooking zone it controls. To switch the
inner cooking zone on, press the knob and turn it to the required position.
To switch on both the inner and outer zone, turn the knob to / then release it.
The knob will return to the maximum intensity position for the hot plate. To adjust
the heat intensity, turn the knob anti-clockwise to the 0 position. To go back to
heating the inner zone only, return the knob to 0 then turn it to the required position.
To switch off a zone, return the knob to 0.
32