Extraordinary Maintenance; Replacing The Light Bulb - Smeg SC106-8 Manual

Instructions for the user

9. EXTRAORDINARY MAINTENANCE

The oven may require extraordinary maintenance or replacement of parts
subject to wear such as gaskets, bulbs, etc. The following instructions describe
how to carry out these minor maintenance operations.
Before any intervention that requires access to live parts, disconnect the
power supply of the appliance.
9.1

Replacing the light bulb

If a light bulb needs to be replaced because it is worn or burnt out (in
multifunction models remove the guide frames; see "8.5.1 Removing guide
frames").
Then remove the bulb cover using a tool (e.g. a screwdriver).
Remove the bulb by sliding it out as
shown.
On some models only: the bulbs are
halogen bulbs, so do not touch them
directly with your fingers, wrap them
in an insulating material.
Replace the bulb with one of the same
type (25W). Replace
correctly, so that the moulded part of
the glass is facing the door.
Press the cover down as far as it will go so that it attaches completely to the
bulb support.
the cover
117