Secondary Menu (Automatic Control Lock - Showroom - Eco-Logic) - Smeg SB32 Manual

5.10 Secondary menu (Automatic control lock - Showroom - ECO-logic)

The hob is equipped with a secondary menu for activating or deactivating some parameters:
1 Automatic control lock: on activating this mode, one minute after the last operation by the user, the
controls will automatically be locked (see 5.8 Control lock).
2 Showroom: on activating this mode, the appliance deactivates all the heating elements, while
keeping the control panel active (useful for demonstration purposes in store). To use the hob
normally, set this mode to "n".
3 ECO-logic (on some models only): on activating this mode, the hob electronics will automatically
adjust the power levels to stay within the set maximum power absorbed: 2; 3 or 4 kW. To use the hob
at maximum power, set this mode to "n".
5.10.1Changing the settings in the secondary menu
While all of the cooking zones are off, hold down key relating to the front left-hand plate for at least 5
seconds.
The cooking zone display will show the number of the setting currently being modified (1: automatic
control lock, 2: showroom, 3: ECO-logic) with its setting at the side (
example
Use keys
the following may be selected
absorbed). To advance and change the subsequent settings, press key
The secondary menu has to be managed independently for each zone on the hob equipped with three
hot plates in line. Repeat the setting operations for the left cooking zone (Single hot plate) and the right
cooking zone (Double hot plate).
40
Instructions for the user
indicates that the automatic control lock is inactive.
and to change the setting to " " or to "
(2 kW), (3 kW),
: active ; : inactive). For
"; if changing the ECO-logic parameter
(4 kW) and (maximum power
.