Control Lock; Power Management - Smeg SB32 Manual

Instructions for the user

5.8 Control lock

The control lock is a device that protects the appliance from accidental or inappropriate use. Useful for
preventing accidental changes to set cooking values, the lock can be activated while the hob is on or off.
5.8.1 Activating the control lock
Press for at least 3 seconds, a confirmation buzzer will sound and the display will show for 2
seconds.
The controls are now locked and if any of the keys is pressed, will be displayed.
For safety reasons, key remains active. The cooking zone or the entire hob can be switched off at
any time, even if the lock is active.
5.8.2 Deactivating the control lock
Press for at least 3 seconds, a confirmation buzzer will sound.
The controls are now unlocked and any key may be pressed.

5.9 Power management

To optimise the energy consumption, the groups made up of two hot plates (see figure below) are
prevented from supplying more than a determined maximum operating power. If the value set for the two
hot plates exceeds the permitted power, the electronic circuit board will automatically maintain the
maximum level permitted modifying the power supplied by the hot plates. The power level selected by
the electronic circuit board will always be visible on the display.
Priority is given to the last zone set.
39