Control Lock; Power Management - Smeg SI641ID2 Manual

Table of Contents

Instructions for the user

5.10 Control lock

The control lock is a device that protects the appliance from accidental or inappropriate use.

This function cannot be enabled if the cooking zones are active.

5.10.1Activating the control lock

After having switched on the hob (see "5.3 Switching on and off the hob"), press keys

and

the same time. After the buzzer has sounded press key

The controls are now locked and

will appear on the display.

In case of a power failure the control lock will be disabled.

5.10.2Deactivating the control lock

Press keys

and

at the same time. After the buzzer has sounded press key

To optimise energy consumption, the groups made up of two hot plates

(see figure below) are prevented from supplying more than a determined

maximum operating power. If the value set for the two hot plates exceeds

the permitted power, the electronic circuit board will automatically maintain

the maximum level permitted modifying the power supplied by the hot

plates. The power level selected by the electronic circuit board will always

be visible on the display.

Priority is given to the last zone set.

For power management reasons, if the front left hot plate has been switched on it will not be possible to

switch on the rear right hot plate as well or vice versa.

Table of Contents

Si642d2