Smeg S45VA Instructions For Use Manual page 35

15.3 Positioning the oven
The appliance is designed for building-in to cabinets made from any heat-
resistant material. Comply with the dimensions shown in following pictures.
When installing in tall units bear in mind that the top/rear of the unit must
have an opening 100 mm deep.
Screw the 4 screws into the inside of the frame.
The manufacturer reserves the right to make any changes deemed useful for
improvement of his products without prior notice. The illustrations and description
contained in this manual are therefore not binding and are merely indicative
Instructions for the Installer
EN
33