Table of Contents
Advertisement
Teledyne API – Ultra Sensitivity Model T200UP NO/NO
PARAMETER
Weight, Ext Pump Pack
Environmental
(1)
As defined by the USEPA
(2)
At constant temperature and voltage
(3)
With adaptive filter, > 20 ppb change
2.1. EPA Equivalency
2.2. Approvals and Certifications
2.2.1. Safety
2.2.2. EMC
2.2.3. Other Type Certifications
10
Information contained herein is classified as EAR99 under the U.S. Export Administration Regulations. Export, reexport or diversion contrary to U.S. law is prohibited.
21 lbs (9.5 kg)
4
Installation Category (Over-voltage Category) II, Pollution Degree 2
Teledyne API's T200UP nitrogen oxides analyzer is designated as an
equivalent method (Number
defined in 40 CFR Part 53, when operated under the following
conditions:
Range: Any full-scale range between 0-0.05 and 0-1.0 ppm (parts per
million).
Ambient temperature range of 20 to 30°C.
Software Settings: Temperature and Pressure compensation ON.
The Teledyne API Model T200UP analyzer was tested and certified for
Safety and Electromagnetic Compatibility (EMC). This section presents
the compliance statements for those requirements and directives.
IEC 61010-1:2001, Safety requirements for electrical equipment
for measurement, control, and laboratory use.
CE: 2006/95/EC, Low-Voltage Directive
North American:
cNEMKO (Canada): CAN/CSA-C22.2 No. 61010-1-04
NEMKO-CCL (US): UL No. 61010-1 (2nd Edition)
EN 61326-1 (IEC 61326-1), Class A Emissions/Industrial
Immunity
EN 55011 (CISPR 11), Group 1, Class A Emissions
FCC 47 CFR Part 15B, Class A Emissions
CE: 2004/108/EC, Electromagnetic Compatibility Directive
For additional certifications, please contact Technical Support:
Toll-free Phone:
Phone:
/NOx Analyzer
2
SPECIFICATION
EQNA-0512-200
800-324-5190
858-657-9800
Fax:
858-657-9816
Email:
sda_techsupport@teledyne.com
Addendum to T200
) for NO
measurement, as
2
07450B DCN6495
Advertisement
Table of Contents
