Table of Contents
Advertisement
SAFETY MESSAGES
Technical
instrument or any other Teledyne API product can be obtained by
contacting Teledyne API's Technical Support Department:
07450B DCN6495
Information contained herein is classified as EAR99 under the U.S. Export Administration Regulations. Export, reexport or diversion contrary to U.S. law is prohibited.
Important safety messages are provided throughout this manual for the
purpose of avoiding personal injury or instrument damage. Please read
these messages carefully. Each safety message is associated with a safety
alert symbol, and are placed throughout this manual and inside the
instrument. The symbols with messages are defined as follows:
WARNING: Electrical Shock Hazard
HAZARD: Strong oxidizer
GENERAL WARNING/CAUTION: Read the accompanying message for
specific information.
CAUTION: Hot Surface Warning
Do Not Touch: Touching some parts of the instrument without
protection or proper tools could result in damage to the part(s) and/or the
instrument.
Technician Symbol: All operations marked with this symbol are to be
performed by qualified maintenance personnel only.
Electrical Ground: This symbol inside the instrument marks the central
safety grounding point for the instrument.
This instrument should only be used for the purpose and in the manner
described in this manual. If you use this instrument in a manner other than
that for which it was intended, unpredictable behavior could ensue with
possible hazardous consequences
NEVER use any gas analyzer to sample combustible gas(es)!
Assistance
regarding
Telephone: 800-324-5190
Email:
sda_techsupport@teledyne.com
or by accessing various service options on our website at
http://www.teledyne-api.com/
CAUTION
.
Note
the
use
and
maintenance
of
this
i
Advertisement
Table of Contents
