Table of Contents
Advertisement
1. Precautions(Safety Warnings)
Unplug the appliance before replacing or repairing any of the electrical parts.
⇒ Be careful to avoid electric shock.
Make sure to use the correct replacement parts.
⇒ Check the model, rated voltage, rated current and running temperature rating.
When troubleshooting, verify that the wire harnesses are connected securely.
⇒ Make sure the connectors are not separated when power is supplied.
Check for visible traces of water on the electrical parts.
⇒ Replace or secure any parts that have come into contact with water.
Check the status of parts after the replacement or troubleshooting.
⇒ All parts must be reinstalled properly.
Check the location where the refrigerator will be used.
Do not install the refrigerator in a damp or wet location and make sure that the surface where the
product will be installed is even.
The refrigerator must be grounded properly.
⇒ The product should be grounded if there is a risk of high humidity or wetness.
The refrigerator must be plugged into a dedicated outlet.
Make sure that the power cord is not damaged in any way, or has any objects placed on it.
If the plug is damaged, replace the plug.
Do not use the plug if it is damaged.
Customers must not try to repair the refrigerator themselves.
Do not store anything in the refrigerator other than food.
⇒ Drugs that require a specific temperature should not be stored in the refrigerator.
⇒ Do not store flammable substances (alcohol, benzene, ether, LP gas, etc.) in the refrigerator as
this may result in explosion.
7
Advertisement
Table of Contents
