3. Disassembly & Reassembly
3-1. Precaution
• Before replacing or repairing an electrical part, be sure to unplug the product's power cord.
- Failing to do so may result in electric shock.
• Be sure to replace any electrical parts with rated parts.
- Be sure to check the model no, rated power voltage, operating temperature etc. printed on the
product.
• When repairing a product, connect the harnesses firmly so that no water enters the product.
- They should not become separated if a certain amount of force is applied.
• When repairing the product, completely remove all dust or foreign substances from the housing,
connectors and terminals.
- Prevents fire due to tracking or short-circuits.
• Check if there are any marks of moisture having entered the electric parts.
- If it appears that moisture has penetrated the part, take countermeasures such as replacing the
part or wrapping the part with insulation tape.
• After fixing a problem, check the assembly status of the parts.
- The status must be the same as before repairing the product.
• Check the operating environment of the refrigerator.
- If the refrigerator is exposed to moisture or is installed near water or on an unstable surface,
relocate the refrigerator.
• Ground the refrigerator if necessary.
- In particular, if there is a danger of electric leakage due to moisture or water, be sure to ground
the refrigerator.
To do list
29