Installing The Qs02 Hdmi Media Streaming - BenQ I Series User Manual

Installing the QS02 HDMI Media Streaming

The supplied QS02 HDMI Media Streaming is an Android TV (ATV) dongle to be used with the
projector. See the instructions below to install the dongle. With a successful installation, you
can enjoy more entertainment programs through this projector.
1. Make sure the projector is turned off and
the power cord is disconnected.
2. Loosen the screw that secure the cover
. Slide to remove the cover
1
3
4. Plug the dongle to the HDMI* port on the
projector.
*This HDMI port is for connecting QS02 HDMI
Media Streaming only.
6. Replace the projector cover
tighten the screw .
2
1
8 Introduction
2 3
1
2
1 2 , and
3
3
3. Plug the USB Micro B cable to the dongle.
.
5. Fit the USB Micro B cable in place below the
dongle.
7. Connect the power cord to the projector and
turn it on. Press
Android TV.
/SOURCE to select