Table of Contents
Advertisement
Operation
Installing the QS01 HDMI Media Streaming
The supplied QS01 HDMI Media Streaming is an Android TV (ATV) dongle to be used with the
projector. See the illustrations below to install the dongle. Make sure that the dongle cover is installed
back correctly after the dongle is plugged. Do not turn the power on with the dongle cover open.
1
4
Starting up the projector
1. Plug the power cord. Turn on the power outlet switch
(where fitted). The power indicator on the projector
lights orange after power has been applied.
2. Press
to start the projector. The power indicator
flashes green and stays green when the projector is on.
The start up procedure takes about 30 seconds. In the
later stage of start up, a startup logo is projected.
(If necessary) Rotate the focus ring to adjust the image
clearness.
3. If this is the first time you turn on the projector, the setup wizard appears to guide you through
setting up the projector. If you have already done this, skip this step and move on to the next step.
•
Use the arrow keys (
•
Use OK to confirm the selected menu item.
2
5
/
/ / ) on the projector or remote control to move through the menu items.
3
6
Operation
19
Advertisement
Table of Contents
