Delete A Nuisance Channel; Restore Channels To The Scan List; Edit A Scan List - Motorola EP450 User Manual

DELETE A NUISANCE CHANNEL

Note: Your dealer/programmer must prepro-
gram a button to access this feature
(see page 22).
If a channel continually generates unwanted
calls or noise (a "nuisance" channel), you can
temporarily remove it from the scan list:
1 While the radio is on the Nuisance Channel,
press the preprogrammed Nuisance
Channel Delete button until you hear a tone.
2 Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
Note: You cannot temporarily delete the
channel that has been prepro-
grammed by your dealer/program-
mer as your designated scan
channel, a priority channel, or the
last remaining channel in the scan
list.

Restore Channels to the Scan List

1 Power off the radio. Once the radio is powered
on again, the deleted nuisance channels are
restored to the scan list.
or
– –
1 Press the preprogrammed Scan button to stop
the scan.
2 Press the preprogrammed Scan button again
to start scanning again. The Deleted Nuisance
Channels are restored to the scan list.
or
– –
1 Select a channel that has not been
preprogrammed for scan by your dealer /
programmer to stop Scan. Once you return to
the original channel, the deleted nuisance
channels are restored to the scan list.

EDIT A SCAN LIST

Your radio can support up to 16 Scan lists.
Each Scan list can contain up to 16 channels.
The same channel can be included in several
Scan lists, and the same Scan list can be
assigned to several channels. Scan lists are
assigned per channel, by your dealer/
programmer. When you edit a Scan list, you
can either add, delete, or prioritize channels.
37
English