Radio Calls; Selective Radio Inhibit; Receive A Selective Call F; Send A Selective Call - Motorola EP450 User Manual

RADIO CALLS

SELECTIVE RADIO INHIBIT

Your radio is equipped with a security feature
that can temporarily render the unit inoperative
when an inhibit signal is sent from the base
station.
This feature is commonly used to disable
radios:
• In case of theft
• For system control reasons
When your radio has been rendered
inoperative by the base station,all controls will
be inoperative except for the On/Off button and
the display shows INHIBIT.

RECEIVE A SELECTIVE CALL F

When you receive a selective call:
The display shows F and the prepro-
•
grammed name or ID of the calling radio.
• The LED indicator flashes yellow, if pro-
grammed by your dealer/programmer.
• You hear two high-pitched tones.
1 To acknowledge the call, press and release the
PTT button.
2 Press and hold the PTT button to talk; release
to listen.

SEND A SELECTIVE CALL

You can send a Selective Call to a particular
radio or to a group of radios, as programmed
by your dealer.
Press the preprogrammed Radio Call button
(see page 22), and proceed to step 4.
– –
or
31
English