Table of Contents
Advertisement
ConnectingYour DVD Player
Unlike any other audiovisual
media format, DVD offers a
wide array of audio and video output options which
allows playback to be enjoyed in any number of system
configurations
from a standard TV with stereo audio
input to a home theater system with a projection
monitor and full surround sound capabilities.
Connecting
two DV-F727
players?
If you have chosen to purchase two DV-F727 players for
combined
control of up to 601 discs, make connections
to the player to be used as the Master player following
the procedures
in this section. When connections
are
complete,
refer to page 66 for a description
of how to
connect the Slave player.
Connection
Guide
The illustration
on this page shows the basic setup using
the audio and video cords included with this player. Use
this illustration as a guide to setting up your home
system.
An explanation of each type of audio and video
connection
available can be found on pages 17 and 18.
To determine the best audio and video connection
setup
for your system, refer to the manuals supplied with the
components
you are making connections
to.
In addition to making physical connections
to your TV or
monitor, it is also necessary to assign the TV screen size,
You can use the (Setup NavigatorJ in the Setup screen
General menu to set whether you are using a wide
screen or standard size TV or monitor (page 21).
Additionally, you can use the _
Screeni setting in the
Setup screen Video menu (page 43).
Notes
• When making connections to this unit or when changing
connections, check that the unit is off by pressang
O STANDBY/ON
and unplug the power cord from the power
outlet,
• The video outputs on this player uses copy protect circuitry to
prevent the video playback on DVDs from being copied. If you
connect the player to a TV via a VCR, or record and I_ay back
the contents of a disc with a VCR, the playback picture may
not be normal
©@
Audio cord
(Included)
m
==
.=
'-4
z
¢n
TV or monitor
Video cord
(9
®
Make
video connections
from the VIDEO OUT jack on the player
to the VIDEO IN jack on the TV or
monitor
using the video cord included with the player (page 18),
When using the VIDEO
OUT jack, set VIDEO SELECT to the top position.
Make
audio connections
from
the AUDIO
OUT jacks on the player to the AUDIO
IN jacks on the TV or
monitor
using the stereo
audio cord included with the player.
Be sure to match
the color of the plugs
with the color of the jacks (red and white)
(page 17),
After all connections
have been made, connect to a power
outlet,
15
Advertisement
Table of Contents
