Bottle Rack - Smeg FL164A Instructions For Use Manual

141850

Bottle rack

(in some models only)
Bottle rack (number depends on model) is intended for storing the
bottles. There are two installation positions available (horizontal or lifted
in the front) thus enabling the positioning of bottles on the stopper as
well.
It is protected against pulling out. If you want to pull it out, simply lift its
rear part and pull it towards you.
Warning!
If the door contains storing shelves,
install the rack in such position that the
length of the bottles will not hinder the
closing of the door.
The rack may carry 9 bottles of 0,75 l or
more at the maximum (total weight max.
13 kg) – note the label underneath the
thermostat box inside the appliance.
Defrost Water Outlet (2)
The interior of the refrigerator is cooled with cooling plate incorporated
in the rear wall. Under the plate there is a channel and an outlet for
defrost water.
Regularly check the defrost water outlet and the channel, because they
should never be clogged (as for example with food rests). If clogged,
use a plastic straw and clean it.
Fruit and Vegetable Container (3)
The container is on the bottom of the appliance under the glass shelf. It
provides adequate humidity which has favourable effect on fruit and
vegetables stored in it (less dehydration).
Door Liner
The door liner consists of various shelves or holders used for storing
eggs, cheese, butter and yogurt as well as other smaller packages,
tubes, cans etc.
The lower shelf is used for storing bottles.
Illumination in the Interior of the Refrigerator
The light for illuminating the interior of the appliance is on, when the
door is opened. The operation of the light does not depend on the
position of the thermostat knob.
Instructions for Use 57