Table of Contents
Advertisement
Selecting programme settings
Selecting the drying level
Check the "Programme chart" to see
which programme you can select a dry-
ing level for and which drying level
meets your requirements.
Touch the sensor control for the dry-
ing level you want.
The selected drying level lights up
brightly.
Selecting the programme running time
for Time Dry/DryFresh
The programme running time can be se-
lected in 10-minute increments. The
programme running time can be
between minutes and up to
hours.
Touch the or sensor control re-
peatedly until the required pro-
gramme running time appears on the
time display.
3. Select a programme and start it
Selecting DryCare 40
It can be used for all fabrics that are free
of wool and are washable at temperat-
ures of 40 °C and above.
This option dries fabrics gently at very
low temperature.
For the best possible drying result:
Reduce the load size for the corres-
ponding programme to half the max-
imum load size specified in these op-
erating instructions.
Touch the DryCare 40 sensor control.
- DryCare 40 can be selected with the
- DryCare 40 is always activated/can-
DryCare 40 is not available for all drying
levels.
It then lights up brightly.
following programmes:
– Cottons
– Minimum iron
– Shirts
– Warm air/DryFresh
not be deselected with Delicates.
27
Advertisement
Table of Contents
