Table of Contents
Advertisement
Installation
External condensed water out-
let
Note
When drying is in progress, condensed
water is pumped into the condensed
water container through the drain hose
which is located at the back of the
dryer.
The condensed water can also be ex-
ternally drained away via the drain hose
at the back of the dryer. This means that
the condensed water container no
longer has to be emptied.
Drain hose length: 1.49 m
Max. delivery head: 1.00 m
Max. drain hose length: 4.00 m
Drainage accessories
- Supplied: Adapter (b), Hose clip (c),
Hose holder (e);
- Available to purchase: "Non-return
valve" kit for connection to an external
water connection. Non-return valve
(d), Hose extension (a) and Hose clips
(c) are supplied.
64
Installation conditions requiring a non-
return valve
Danger of condensed water
back-flow.
Water could flow back into the
tumble dryer or be drawn into it.
Back-flow water could damage the
tumble dryer and also the room in
which it is located.
The non-return valve should be used
if the end of the hose is immersed in
water, or if other water connections
are installed.
Maximum delivery head with non-return
valve fitted: 1.00 m
Installation conditions requiring the fit-
ting of a non-return valve:
- Drainage into a sink or floor gully
where the end of the hose is im-
mersed in water.
- Connection to a sink drain outlet.
- Connection to a drainage system
already in use by another appliance,
e.g. a dishwasher or washing machine.
If the non-return valve is incorrectly
fitted the appliance will not drain.
The non-return valve has to be fitted
with the arrow on it pointing in the
direction of flow.
Arranging the drain hose
Damage to the drain hose
through incorrect handling.
The drain hose can suffer damage
and leak.
Do not pull on the drain hose and do
not stretch it or allow it to become
kinked.
Advertisement
Table of Contents
