Organ Screen Functions; Basic Screen Functions - Roland KR-75 Manual

Digital intelligent piano
Hide thumbs Also See for KR-75:
Table of Contents

Advertisement

* Likewise, if a song only has a <Mark B>, pressing
<Repeat> will start a loop between the beginning of the
song and <Mark B>.
@ Erasing Marks
Hold down <Clear> and press either <A: (the mea-
sure number)> or <B: (the measure number)> to
erase a marker.
10.2. Organ screen functions
For information on using markers, see above.
Using the Arranger
You may remember that we told you that, by press-
ing the [START/STOP] or [INTRO/ENDING}] but-
ton, you can start playback of the drum pattern of
the selected Music or User Style. The Organ screen
does, however, provide an Arranger function that
allows you to use entire Music Styles (with bass
and accompaniment lines). The split point can be
set anywhere between the B1 and the B6.
1, Press <Arranger>.
ARRANGE
2. Using the button to the side of the display, you can turn the
Arranger function on and off.
At power on, this function will be set to Off.
Lower Tone on/off and split point
You can switch the Lower Tone on and off and set
the split point anywhere between the B1 and the B6.
1. Press <Split>.
SPLIT.
Split
Point
F RS
Mi Turning the Lower Tone on and off
2. Use the buttons to the left of the display to switch the Low-
er Tone on or off.
M@ Changing the Split point
3. Use the buttons to the right of the display to select the Split
point.
Each time you press the button, the Split point will
shift one key.
* You can also set the split point by pressing the key
where you want the keyboard to be split while holding
down <Split>.
10.3. Basic screen functions
* See above for how to set the split point.
° See "Marker function: repeatedly playing back the
same section" on page 42 for information on using
markers.
Auto: changing the Arranger
defaults
You may remember that selecting a Music Style
means that the KR-75 automatically loads its preset
tempo, selects an Upper Tone that matches the
mood of the Styles, and activates the Chord Intelli-
gence function. Here is how to keep the KR-75 from
loading some or all of these settings:
1. Press <Auto>.
One
Touch
Prg,
Chord
Intell,
Full
Ruto
Gia
| Chord |
2. Select what you are going to change with the buttons to the
left of the display.
Mi One Touch Prg
Full Aut: By selecting a Music Style, you also recall
its preset tempo, a suitable Upper Tone and a few
other settings (see "Settings" on page 23).
Tone Lock: The KR-75 no longer selects an Upper
Tone when you choose another Music Style.
Tempo Lock: The KR-75 no longer sets the preset
tempo of the selected Music Style.
Tone, Tempo Lock: Selecting another Music Style
no longer loads the preset tempo and Upper Tone.
OFF: In this mode, the KR-75 loads none of the set-
tings related to the Music Style you select (see "Set-
tings" on page 23).
© Full Auto is switched on by default.
i Chord Intelligence ON/OFF
3. Switch the Chord Intelligence function on/off with the but-
tons to the right of the display.
* Chord Intelligence is set to be switched on by default.
For more detailed information about Chord Intelligence,
please refer to "Easy fingering — Chord Intelligence" on
page 27.
43
m
z
GQ)
[mat
n
=r

Advertisement

Table of Contents
loading

Table of Contents