Table of Contents
Advertisement
Owner's Manual
7.5. Accompaniment and melody
volume balance
Global balance
You can adjust the balance of volume of the accom-
paniment (Music Style) and the Upper Tone you
use to play the melody.
Press [UTILITY] and use the <A> and <W> to the
right of the display to adjust the volume balance.
Adjusting the volume of each part —
Part Volume
The BAL function adjusts the balance of the overall
accompaniment volume and that of the melody
(Upper). With the Part Volume buttons, you can
adjust the volume of individual parts, or prevent a
part from even sounding.
There are two Part Volume buttons: [ACCOMP]
and [KEYBOARD]. Press [ACCOMP] if you want to
change the volume of an accompaniment part, and
the [KEYBOARD] button to adjust the volume of a
part that can be assigned to the keyboard.
Accomp
Keyboard
Volume
Volume of the Rhythm, Bass,
Accomp, and Chord/Bass Tones
These Tones are assigned or related to the Arranger
(the automatic accompaniment).
1. Press the Part Volume [ACCOMP] button.
For each part, a bar graph and numerical value are
displayed on screen. The correspondence between
the parts and what is shown on the screen is as fol-
lows:
srommemtee ACCOMP BALANCE +o
80
80
80
so_
+
mz
ms
-
Aincame
<Rhythm>....... Drums
<Bass> .......... Accompaniment Bass and Bass
Tones
<Accomp>....... Accompaniment parts (1~3)
<Chord>......... Chord Tone (see "Chord Tone
Setting" on page 44 for details
about the Chord and Bass
Tones)
2. Select the part whose volume you wish to adjust using the
buttons below the display.
3. Adjust its volume with the <A> and <¥> buttons.
Press the <&> button to increase the volume, and
the <W> button to decrease it.
Volume of the Drums, SFX, Lower,
Upper, or Layer Tone
These are the parts you can play yourself, which is
why you need to press the other Part Volume but-
ton.
1. Press the Part Volume [KEYBOARD] button.
For each part, a bar graph and numerical value are
displayed on the screen.
severe
KEYBOARD BALANCE s--0--~
80
85
85
100
Drs /SFX
The correspondence between the parts and what is
shown on the screen is as follows:
<Drs/SFX>
...... Drums and SFX (sound effects)
<Lower>......... Lower
<Layer>......... Layer
<Upper>......... Upper
2. Use the buttons below the display to select the part whose
volume you wish to adjust.
3. Use the <A> and <¥> buttons to adjust the volume.
Advertisement
Table of Contents
