Hse Peale; 16-Track Sequencer - Roland KR-75 Manual

Here's how to save a Style Party sequence:
\
1. Insert a disk you want to save your Style Party sequence to
into the disk drive. Make sure the write protect tab is set to
"Write".
You can save onto the following disks:
¢ New disks formatted on the KR-75.
¢ Disks already containing KR-75, E-300, or E-500
songs.
2. Press the Composer [SAVE] button.
The display now jumps to the Song Save screen.
emimiminomimininte Song Save
a
Lifempty
[ Wo Song J]
__ 9, Composer Menu
3. Use the <A> and <¥> buttons to the right of the display to
select a song number.
You can choose any number between "1" and "99".
Do note, however, that selecting a song number
that already contains data means that the song in
question will be overwritten by your new song.
4, Enter a name for your song with <> and <P >below the
display, and <A> and <¥> to the left of the screen.
The number of songs that can be saved onto a disk
depends on the amount of performance data they
contain.
m
Pd
Q
a
wn
=x
ur
. Press <Save SP>.
Press [EXIT] instead if you do not want to save
your song after all.
Note: Be sure to set the protect tab of your floppy disk
back to "Protect" after removing the floppy.
Functions of the Composer Menu
1. Press the Composer [MENU] button.
The display now jumps to the Composer Menu.
COMPOSER MENU) sores
16trk Sequencer] jRecording Mode
Disk Format
Page +>
Ld
b
Chord Sequencer
Choose one of the seven functions "on the menu".
2. Use the buttons next to the display to select the function.
The Composer Menu has two pages. Use the
<<4<4PAGE> and <PAGE> b> buttons to bring up
the other page.
To leave the menu, press the [EXIT] button. The dis-
play then returns to the previous screen.
9.1. 16-track Sequencer
This sequencer allows you to record up to 16 differ-
ent parts onto separate tracks using different Tones.
Needless to say that you should take advantage of
the sequencer to record your own songs with origi-
nal arrangements.
® See "Link to 16TRK Sequencer" on page 50 for a
parameter you may want to set first.
=
. On the Composer Menu, press <16trk Sequencer>.
The display now jumps to a 16-Track Sequencer
screen that looks similar to the following.
The [WHOLE] button also lights to signal that the
KR-75 will now function in Whole mode. The 16-
track Sequencer indeed only uses one Tone for each
track, so you cannot record in Split or Layer modes.
2. Use <> and <P> to the lower right of the display to select
the track you wish to record.
The currently selected track appears in reverse
video on the display.
© Drum or SFX parts can only be recorded on the "D"
or "S" tracks.
wW
. Get ready to play.
Choose the Tone and make the necessary settings
for the performance.
© You can only assign Drum Sets to the "D" track,
while the "S" track only triggers sound effects.
33