Removing Child From Child Restraint; Accessories On Select Models - Dorel Juvenile Group Enspira 65 Instruction Manual

C-4 Removing Child From Child Restraint
1.
Loosen Harness Straps
Push in on the harness
adjustment lever under the flap.
Pull out on harness straps just
above buckle tongues.
2. Release Chest Clip
Push in the release button and
pull apart.
3. Unbuckle Harness
Press down on the red buckle
release button to release the
buckle tongues. Place harness
straps over sides of child
restraint and remove the child.
21
C-5 Accessories on Select Models
Infant Head Support
The infant head support is
designed to support the infant's
head and neck. Infant head
support MUST not cover the
infant's face in any way. Remove
the head support when the
infant's head has reached the
top, inside part of the infant head
support.
To remove the support, undo
the fastening strips and slide the
insert out.
Reverse steps to replace support.
Harness Covers
The harness covers help to
provide comfort to the infant's
neck. For harness covers to fit
correctly you may have to push
the ends of the covers through
the upper harness slots.
There are different harness cover
styles, depending on your model.
To remove the harness covers
with fastening strips, you will
have to undo the fastening strips
and remove harness covers.
To remove harness covers
without fastening strips, you will
have to unhook the harness straps from splitter plate, pull
harness straps out of the upper harness slots and remove
harness covers. Rethread harness straps and re-hook the
harness strap loops onto the splitter plate (see section C-9).
22