Table of Contents
Advertisement
Full Body Pillow
The full body pillow helps to provide
comfort to your child.
To remove the full body pillow, you
will have to unhook the harness
straps from splitter plate, pull
harness straps out of the upper
harness slots and remove harness
covers and infant head support,
unthread harness from chest clip
and buckle (see section C-7).
Remove full body pillow.
Rethread harness system (see
section C-9).
C-6 Reclining Child Restraint
This child restraint has 2 positions:
2
Rear-facing -
1
the child restraint so that the bottom
level to ground line is level with the
ground or for older children, rotate
the child restraint between the top
and bottom level to ground lines on
the side of the shell.
2
MUST be upright.
Forward-Facing -
2
MUST be upright.
Booster Seat -
Upright
For upright position, pull recline
stand out from under seat and
push up to lock in place.
Recline
To recline, pull down to unlock
recline stand and fold under
seat.
23
C-7 Removing Harness System
Harness system
Restraint as a Booster Seat.
1
You MUST recline
4
MUST
be removed to use this Child
1.
Unhook Harness Straps
from Splitter Plate
Fully loosen harness straps.
Starting in the back of the
child restraint, unhook
harness strap loops from
splitter plate.
2.
Secure Splitter Plate
Pull out on harness
adjustment strap so that the
splitter plate is flush against
the bottom of the shell.
3.
Remove Harness Straps
1
From the front, pull harness
straps through the upper
harness slots (1).
2
Unthread harness straps from
the chest clip (2).
Unthread harness straps from
3
the buckle tongues (3).
Holding one harness strap,
pull harness completely out
of lower harness guides (4).
24
continued on next page.
Advertisement
Table of Contents
