Choosing Restraint And Position; Preparing Child Restraint To Fit Your Child - Dorel Juvenile Group Commuter Instruction Manual

4358-3502C Notch Commuter

Choosing Restraint and Position

Your child's height, weight and age determine how your
child restraint should be placed in the vehicle and which
restraint should be used.
Page 7 of 23 Dorel Commuter / Ventura / High Back Booster (5/06)
5/30/06 12:49 PM Page 13
22-40 lbs. (10.1-18 kg)
34-43 in. (85.1-110 cm)
and Over 1 Year Old
Forward-Facing using
5-point harness
Child and child restraint face
the front of the vehicle and
are placed in the back seat.
40-80 lbs. (18.1-36.3 kg)
43-52 in. (110.1-132.1 cm)
and Over 1 Year Old
Belt-Positioning Booster
using vehicle
lap/shoulder belt
combination
Child and child restraint face
the front of the vehicle and
are placed in the back seat.
5-point harness is removed.
10
Preparing Child Restraint to Fit
Your Child
You MUST make these adjustments with your
child before you install the child restraint in the
vehicle.
1
2
3
4
Make sure LATCH belt
packaging is pulled free of
child restraint shell.
Loosen harness by pushing
down on the harness
release lever while pulling
out on the harness.
Depending on your model,
the harness release lever
may be under a flap
on the pad in the
front of restraint.
Press on harness retainer
release button and pull
apart.
Press red button on
buckle to release the
buckle plates. Place
harness over sides of child
restraint.
continued on next page.
11