Yield Parts are rated to last for 120 K, which is expected to be
longer than this machine's rated lifespan of five years.
For customers who are very heavy users, it may be necessary to
change Yield Parts during the life of the machine.
When installing Yield Parts, the machine must be reset.
Reset procedure is not a user function and must be performed by
a trained serviceperson.
See FSM (Field Service Manual) for reset procedures.
After performing any maintenance procedure, always print out a
Configuration Report, and check Yield Parts.
Slide 95
.
Note to Service Personnel
95
Rinmei-P1 / M012/M013 / P1a/P1b
/ SP 3400N/SP 3410DN