Programme Sequence; Anti-Crease; Cooling Down Temp; Drying Levels - Miele TWV 780 WP Operating Instructions Manual

Settings
Running a RemoteUpdate
If a RemoteUpdate is available for your
tumble dryer, it will be displayed auto-
matically for you.
You can choose to start the RemoteUp-
date immediately or wait until later. If
you select "Start later", the prompt to
run the RemoteUpdate will be displayed
again the next time you switch on your
tumble dryer.
The RemoteUpdate can take a few
minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
a RemoteUpdate is available.
- Once a RemoteUpdate has been in-
stalled, it cannot be undone.
- Do not switch off the tumble dryer
during a RemoteUpdate. Otherwise,
the RemoteUpdate will be aborted
and will not be installed.

Programme sequence

Anti-crease

The Anti-crease function reduces
creasing after the end of the pro-
gramme.
The drum will continue to rotate for up
to 2 hours after the drying cycle has fin-
ished. This helps to reduce creasing.
Options
-
Off
-
1 h
- (factory default)
2 h
96

Cooling down temp.

The laundry will be cooled down auto-
matically before the end of the pro-
gramme. The automatic cooling-down
phase which takes place before the
end of a programme can be set at a
cooler level for all the drying level pro-
grammes. This means that the cooling
phase is extended.
Selection
The value is set in increments of 1 °C.
- 55 °C (factory default setting)
- ...
- 40 °C

Drying levels

You can alter the drying levels for the
Cottons, Minimum iron and Automatic
programmes.
It can be set to one of 7 different set-
tings.
Factory default: a medium setting

Machine parameters

Airways indicator

Fluff should be removed after drying.
In addition, this indicator will remind
you to clean the filters when a certain
amount of fluff has collected in them:

Clean the fluff and plinth filters. See the
operating instruction manual for more in-
formation.
You can decide at what level of fluff
this reminder should be given.
Options
You will have an idea of which option
you should pick after a few drying pro-
grammes.