Starting A Programme; Starting The Programme - Miele TWV 780 WP Operating Instructions Manual

Starting the programme

The programme can be started when
the Start/Stop sensor control is flashing
on and off.
 Touch the Start/Stop sensor control.
The Start/Stop sensor control lights up
constantly.
 Status

Time left
Cottons
and the programme duration re-
Drying
maining will light up in the display.
The laundry will be cooled down shortly
before the end of the programme.
Tip: In the pull-down menu you can
view the selected drying level or dura-
tion and the energy consumption.
The display will only light up
PerfectDry
with programmes with selectable drying
levels:
- Hollow point  after a programme
has started
The drying level reached will still be
shown later on.
- Solid point  when the drying level is
reached
measures the residual mois-
PerfectDry
ture of the laundry. In programmes with
selectable drying levels,
the laundry precisely, although the result
is also influenced by the calcium con-
tent of the water.
adapts, constantly increasing the accur-
acy of the time left.

1:42 h
Machine iron
 PerfectDry
Add laundry
PerfectDry
continually
PerfectDry

5. Starting a programme

If you barely place anything inside the
tumble dryer or load it with dry laundry,
this will be sensed by the empty drum
detection feature. The automatic load
recognition function will restrict the run-
ning time of the selected programme
once it has started and will continue to
dry or air your laundry or textiles in a
gentle manner.
11:02
To prevent laundry wearing out
avoid overdrying it.
Energy savings
After 10 minutes, the indicators dim and
the Start/Stop sensor starts flashing.
 Touch the Start/Stop sensor to
switch the indicators on again (this
does not have any effect on a running
programme).
The drum lighting switches off once the
programme has started.
Adding laundry
You can add laundry items after the pro-
gramme has started.
 Follow the description in "Changing
the programme sequence – Adding or
removing laundry".
dries
31