Replacing The Condensed Water Spray Jet - Miele TWV 780 WP Operating Instructions Manual

Problem solving guide
 Remove the condensed water con-
tainer.
 Reach under the side lug on the spout
with your finger.
 Pull out the spout.
70
Be careful not to tug on the hose to
avoid detaching it.
 Guide the end of the hose through the
opening.
 Hold it securely with one hand.
 Use your other hand to pull the fluff
filter off the hose.
 Rinse the fluff filter with a water jet
until all the fluff has been removed.
 Attach the clean fluff filter to the end
of the hose.
 Now feed the hose back into the con-
densed water container.
 Refit the spout in the condensed wa-
ter container ensuring that it is posi-
tioned correctly. Please refer to the
image.
Replacing the condensed water
spray jet
When certain programmes are being
used, water is taken from the con-
densed water container and sprayed
into the drum. The spray jet can some-
times stop working. Limescale depos-
its have built up on the spray jet.
Remove the spray jet (optional access-
ory). Replace the spray jet.
You can only replace the spray jet us-
ing a special tool. The special tool is
supplied with the new spray jet.

Using the wrong tool can cause
damage.
Doing so can damage the spray jet or
the tumble dryer.
Only use the tool supplied. Do not
use any other tool.