Problem solving guide
General problems with the tumble dryer
Problem
You can hear buzzing or
humming operating
noises.
A programme does not
start
When the DryFresh,
PowerFresh or Dry-
Care 40 extra options
are selected, the drying
level "jumps back" to a
different one.
The display is dark and
the Start/Stop control is
flashing slowly.
The dryer is switched off
at the end of the pro-
gramme.
The display is in a differ-
ent language.
66
Cause and remedy
The compressor (heat pump) is operating. Or you
have selected a programme which sprays condensed
water into the drum.
No action required. These noises are quite normal
and can be heard when the compressor or the con-
densed water pump is operating.
There is no fault.
No obvious cause.
Connect the tumble dryer to the mains
Turn on the tumble dryer
Close the door
Check whether the mains fuse has tripped
Has there been a power cut? When power is restored
any previously running programme will restart auto-
matically.
The drying level you selected previously cannot be
combined with the extra option. The closest possible
drying level is selected automatically.
The display has switched off automatically to save en-
ergy (Standby mode).
The drum will turn at intervals in the anti-crease
phase.
Press any control. This switches Standby off.
The tumble dryer switches off automatically. This is
not a fault, but a normal function.
A different language has been selected in "Settings,
Language ".
Set the language you want. The flag symbol serves
as a guide.