Table of Contents
Advertisement
3. Select a programme and start it
Starting a programme
Touch the flashing Start/Add laundry
sensor control.
The Start/Add laundry sensor control
lights up.
Programme sequence
- If Delay start has been selected, the
Delay start time will start to count
down first.
- The programme starts.
- The PerfectDry indicator will only
flash/light up for programmes with se-
lectable drying levels (see also "Oper-
ating the tumble dryer").
- The tumble dryer measures the resid-
ual moisture of the laundry and calcu-
lates the required programme running
time accordingly.
If you barely place anything inside the
tumble dryer or load it with dry laun-
dry, this will be sensed by the empty
drum detection feature. The automatic
load recognition function will restrict
the running time of the selected pro-
gramme once it has started. The fab-
rics will be gently dried or aired. In this
case, the PerfectDry indicator does
not light up at the end of the pro-
gramme.
To prevent laundry wearing out
avoid overdrying it.
- Before the programme finishes, the
laundry is cooled.
Energy savings
After 10 minutes, the indicators dim.
The Start/Add laundry sensor control
flashes slowly.
28
Touch the Start/Add laundry sensor
control to switch the indicators on
again (this does not have any effect
on a running programme).
Adding laundry
You can add laundry items after the pro-
gramme has started.
Follow the description in "Changing
the programme sequence – Adding or
removing laundry".
Advertisement
Table of Contents
