Table of Contents
Advertisement
Updates to Your Machine using the "Schwinn Toolbox™" App
This fitness machine is equipped with Bluetooth
App. Once the App is installed on your device, the App will inform you of when there is an update to your machine.
1. D ownload the free App, named Schwinn Toolbox
Note: For a complete list of supported devices, review the App on the App Store or Google Play™.
2. Install the App.
When notified that there is an update to your fitness machine, follow the prompts on the App. Place the device that is
running the App on the Media Tray. The App will update the software on the machine with the latest version. Do not
remove your device from the Media Tray until the update is complete. The machine will return to the Welcome Screen
when the update is completed.
Workout with Other Fitness Apps
This fitness machine has integrated Bluetooth
our latest list of supported partners, please visit: www.nautilus.com/partners
Bluetooth
Heart Rate Monitor (not supplied)
®
Your fitness machine is equipped to be able to receive a signal from a Bluetooth
connected, the Console will display the Bluetooth
with your Bluetooth
HR device.
®
If you have a pacemaker or other implanted electronic device, consult your doctor before using a Bluetooth
chest strap or other Bluetooth
Note: Be sure to remove the protective cover (if provided) from the Heart Rate Sensor before use.
1. Put on your Bluetooth
®
2. Push the Connect Bluetooth
Heart Rate Monitor Connected icon will flash on the Console while searching.
Note: Any previously connected HR devices will be disconnected. However, if they are within range, the Console may
find them again if unable to locate your Monitor.
3. The Bluetooth
Heart Rate Monitor Connected icon will stop blinking when connected. You are ready to work out.
®
At the end of your workout, push the Connect Bluetooth
Contact Heart Rate Sensors
Contact Heart Rate (CHR) sensors send your heart rate signals to the Console. The CHR sensors are the stainless steel
parts of the Handlebars. To use, put your hands comfortably around the sensors. Be sure that your hands touch both the
top and the bottom of the sensors. Hold firm, but not too tight or loose. Both hands must make contact with the sensors for
the Console to detect a pulse. After the Console detects four stable pulse signals, your initial pulse rate will be shown.
Once the Console has your initial heart rate, do not move or shift your hands for 10 to 15 seconds. The Console will now
validate the heart rate. Many factors influence the ability of the sensors to detect your heart rate signal:
• Movement of the upper body muscles (including arms) produces an electrical signal (muscle artifact) that can interfere
with pulse detection. Slight hand movement while in contact with the sensors can also produce interference.
• Calluses and hand lotion may act as an insulating layer to reduce the signal strength.
20
connectivity and can be wirelessly updated with the "Schwinn Toolbox™"
®
™
connectivity which allows it to work with a number of digital partners. For
®
Heart Rate Monitor Connected icon. Follow the instructions provided
®
heart rate monitor.
®
Heart Rate monitor and activate it.
button. The Console will actively search for any devices in the area. The Bluetooth
®
. The App is available on the App Store and Google Play™.
®
button to disconnect your HR monitor from the Console.
®
heart rate (HR) monitor. When
®
®
Advertisement
Table of Contents
