Reversing the door opening direction
The direction in which the appliance door opens can be reversed.
Note: Disconnect the appliance from the power mains before reversing the door opening direction.
Tools required:
Note:
•
If the appliance has to be tilted to allow access to parts on the bottom, ask another person for
assistance or gently place the appliance on some soft padding to prevent damaging it. To reverse
the opening direction, proceed as follows.
1.
2.
3.
4.
14
Socket wrench No. 8,
Cross-point screwdriver
Flat screwdriver
Spanner No. 8
Place the appliance in an upright position. Open the top door and
remove the door racks (to prevent damaging them during the
procedure). Close the door.
Remove the top hinge cap (1).
Undo the screws (2) and remove the hinge (3). Hold the door while
doing this to prevent it from falling.
Remove the top door from the middle hinge by carefully lifting it
straight up. Lay the door onto a smooth surface.