Table of Contents
Advertisement
High temperature alarm
Switching off the alarm:
•
Acknowledge and turn off the acoustic alarm by pressing any key. Current temperature in the
compartment where the temperature is too high will start to flash on the B3 display unit. If you do
not acknowledge and switch off the acoustic alarm, then it will be activated every hour for
approximately 15 minutes.
•
The next time you press the B key, the temperature set for the compartment in which the
temperature is currently too high will start to flash, and the symbol for the compartment where
the temperature is too high will be lit (B1 or B2). The temperature display will flash until the
temperature drops to below the alarm value.
•
When the temperature drops to below the alarm value, then the temperature display will stop
flashing and it will be lit continuously. Refrigerator compartment temperature will be displayed
and the B2 symbol will light up.
Open door alarm
If the refrigerator or freezer compartment door is open for too long, an acoustic alarm (repetitive beep)
will be activated. If the alarm is not deactivated manually, it will be sounded for 10 minutes.
The appliance will continue to operate as if the door was closed.
To switch off the alarm: to switch off the alarm, close the appliance door.
INFORMATION!
If you switch off the alarm by pressing any key, the alarm will be reactivated in 4 minutes if the
door is still open.
INFORMATION!
If you leave the door open for more than 10 minutes, the alarm will no longer be sounded.
Appliance operation will switch to safe mode in order to provide sufficient cooling and prevent
food spoilage despite the open door.
24
If the temperature inside the appliance is too high, then an acoustic alarm
will be activated (intermittent tone). HI will flash on the B3 display unit,
and the symbol for the part of the appliance where the temperature is
too high (B1 or B2) will be lit.
•
Every time the appliance is switched on with the A key, there is a
24-hour delay in high temperature alarm operation. If the appliance
does not reach the sufficiently low temperature in this period, the
alarm will be activated.
Advertisement
Table of Contents
